Cabletron Systems RoamAbout Przewodnik Instalacji Pobierz pdf (Strona 67)

Installing the Access Point 3-31

Configuring the Access Point

12) Enter a station name. The station name is displayed when clients run the

RoamAbout Client Utility. Each Access Point should have a unique station

name.

13) To implement your changes, select Reset from the main window, then select

Reset with Current Settings. Allow approximately one minute for the Access

Point to reset and complete its self-test.

Using the RoamAbout Access Console Port

If managing the Access Point with the console port, do the following:

1) Press the <Return> key at the terminal that is connected to the console port

until the RoamAbout Access Point Installation Menu appears. If using a

computer, start the terminal emulation program and connect to the console

port.

2) To allow the AP Manager or other management tools using SNMP to

remotely manage the Access Point, perform the following:

a) Choose Set IP Address from the Installation Menu.

b) Enter the IP address, subnet mask, and default gateway.

3) Choose Module-Specific Options from the Installation Menu, then choose

Set Wireless Configuration.

4) Enter the name of the wireless network.

5) Enter a channel. If there are other Access Points whose coverage areas

overlap, enter a channel that is at least five channels apart from the adjacent

Access Points, or the same channel (some countries that do not have five

channels, for example, France).

6) Enter a station name. This name is displayed when clients run the RoamAbout

Client Utility. Each Access Point should have a unique station name.

7) To implement your changes, reset the Access Point by selecting Reset with

Current Settings from the Installation Menu. Allow approximately one

minute for the Access Point to reset and complete its self-test.

1 2 ... 62 63 64 65 66 67 68

Brak uwag

Cabletron Systems RoamAbout Przewodnik Instalacji Strona 67