
Installing the Access Point 3-19
Desktop Installation
3 Remove the mounting bracket from the Access Point:
• Completely loosen the captive screw.
• Slide the bracket until the two screw slots are directly below the two
shoulder mounting screws.
• Lift and remove the bracket from the Access Point.
4 Remove the captive screw bracket by removing two screws.
5 Re-install the two screws.
Step Action
fig1
Screw Slot (2)
Shoulder
Screw (2)
Remove
Mounting Bracket
Captive Screw
fig2
Bracket
Screw (2)
Komentarze do niniejszej Instrukcji