Cabletron Systems RoamAbout Przewodnik Instalacji Pobierz pdf (Strona 66)

Configuring the Access Point

3-30 Installing the Access Point

Configuring the Access Point

If you are creating a new wireless network, refer to the RoamAbout 802.11 Wireless

Networking Guide for the complete configuration procedures. If you are adding this Access

Point to an existing wireless infrastructure network, the following sections provides the

basic procedure to configure the Access Point. Refer to the RoamAbout 802.11 Wireless

Networking Guide for details.

Using the RoamAbout Access Point Manager

If you manage Access Points with the RoamAbout Access Point Manager, do the

following:

1) At the computer with AP Manager installed, start the AP Manager by clicking

the Start button on the Windows desktop and selecting

Programs

→RoamAbout→RoamAbout Access Point Manager.

2) Select File

→Open from the menu bar to open the appropriate group of

Access Points, or to add to an existing managed list.

3) Click on the Setup/Add New Access Point button to setup/add an Access

Point.

4) When prompted, click Yes to provide an IP address.

5) Enter the Access Point’s wired MAC address (printed on the front of the

Access Point under the plastic cover).

6) Assign the Access Point a valid IP address for your network.

7) Enter the Access Point SNMP read/write community name, which is by

default public.

8) If necessary, change the default gateway and subnet mask. Click OK when

completed.

NetRider Loader starts. In approximately two minutes, you should see a

BootP Request and Reply in the NetRider Loader window. Click OK and

then click Close.

9) In the Identification dialog box, enter the text to describe the Access Point.

Click the Help button for details. Click OK when completed.

10) In the Wireless Parameters dialog box, enter the name of the wireless

network.

11) Enter a channel. If there are other Access Points whose coverage areas

overlap, enter a channel that is at least five channels apart from the Access

Points.

1 2 ... 61 62 63 64 65 66 67 68

Brak uwag

Cabletron Systems RoamAbout Przewodnik Instalacji Strona 66