Cabletron Systems Access Server 316 Przewodnik Instalacji Pobierz pdf (Strona 162)

Modem Configuration Problems

13-14

8 Monitor the port status to determine which modem signals are being asserted. Enter

the following command on your access server.

Substitute the port number for 2:

Local> MONITOR PORT 2 STATUS

Port 2: (Remote) Server: DS700_08

Access: Remote Current Service:

Status: Connected Current Node:

Sessions: 1 Current Port:

Input XOFFed: No Output Signals: DTR RTS

Output XOFFed: No Input Signals: DCD CTS DSR RXD

For information on configuring your access server for modem signals, refer to the

Network Access Software Management Guide.

9 Verify that the access server port hardware is working correctly. See the section

Verifying a Port for Hardware Failure (page 10-8).

10 Verify that the Telnet listener is configured correctly. On the access server that offers

the Telnet listener, enter the following command. Substitute the number of the Telnet

listener for 2014:

Local> SHOW TELNET LISTENER 2014

Listener TCP-port: 2014 Listener Type: TELNET

Identification:

Ports: None

Connections: Disabled

IP Address: 0.0.0.0 (will default to server’s IP address)

Verify that Connections are Enabled and the Telnet listener is configured on the

correct port. For more information on configuring a modem for access through a

Telnet listener, refer to the Network Access Software Management Guide.

11 For more information on Telnet resource connection problems, refer to Chapter 3.

Step Action

1 2 ... 157 158 159 160 161 162 163 164 165 166 167 ... 301 302

Brak uwag

Cabletron Systems Access Server 316 Przewodnik Instalacji Strona 162