Cabletron Systems SmartSwitch Router Dokumentacja Pobierz pdf (Strona 339)

100

101

Chapter 37: system Commands

SSR Command Line Interface Reference Manual 37 - 7

system set bootprom

Purpose

Sets parameters for the boot PROM.

Format

system set bootprom

netaddr

netmask

tftp-server

[tftp-gateway

]

Mode

Configure

Description

The

system

set

bootprom

command sets parameters to aid in booting the SSR’s

system software image remotely over the network. You can use this command to set

the SSR’s IP address, subnet mask, TFTP boot server address, and gateway address.

Note:

These parameters apply only to the Control Module’s en0 Ethernet inter-

face.

Parameters

netaddr

The IP address the SSR uses during the boot exchange

with the TFTP boot server.

netmask

The subnet mask the SSR uses during the boot ex-

change.

tftp-server

The TFTP boot server’s IP address.

tftp-gateway

The gateway that connects the SSR to the TFTP boot

server.

Restrictions

None.

Example

The command in the following example configures the SSR to use IP address

10.50.88.2 to boot over the network from TFTP boot server 10.50.89.88.

ssr(config)# system set bootprom netaddr 10.50.88.2 netmask 255.255.0.0

1 2 ... 334 335 336 337 338 339 340 341 342 343 344 ... 361 362

Komentarze do niniejszej Instrukcji

Brak uwag

Cabletron Systems SmartSwitch Router Dokumentacja Strona 339

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Networking Cabletron Systems SmartSwitch Router