Cabletron Systems RoamAbout Podręcznik Użytkownika Pobierz pdf (Strona 34)

Installing the AP into a Standalone Configuration

3-4 Installing Your Access Point

Installing the AP into a Standalone Configuration

This section describes how to install the AP as a standalone module.

Perform the following procedure to install the AP as a standalone module:

Step Action

1 Select the appropriate location for the installation of your AP.

2 Connect the AP to the wired network using either the 10BaseT or

ThinWire connectors, as follows:

To Connect to ThinWire Network –– As shown in Figure 3-2, connect

a ThinWire cable, T-connector, and terminator to the BNC connector on

the AP.

Figure 3-2: Connecting to a ThinWire Network

50-ohm

Terminator

T-Connector

LKG-8685-931-01

Access Point

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 89 90

Brak uwag

Cabletron Systems RoamAbout Podręcznik Użytkownika Strona 34